The wide range of implants Tov implant provides a variety of clinical solutions, the reconstruction unit, or screw-threaded, with bridges or hybrid prostheses.

Our dental implants are produced in a wide range of 3 to 6 mm in diameter and 6-16 mm in length.

All implants are titanium alloy 6AL 4V special IT.

Our dental implants are self-tapping with turns to promote the primary stabilizing with a very good distribution of the occlusal load collar to the apex.

All our implants with internal hex.

Tov implant is convinced that future success in the implant market is closely linked to its own efforts and therefore provides research and development.

Our research and development team continually working on new solutions for our modern implant systems with major universities in Israel.

Our research and development team also pays particular attention to the ease of use of our products, the use of biocompatible materials and the control of excellence in manufacturing, while ensuring the quality of products the interests of patients and safety of users.


Surface treatment
 
A surface can be defined as an abrupt interruption of the crystallographic arrangement ordered.

This interruption causes an alteration of the electronic properties at the atomic scale, therefore, modify the physicochemical properties of this particular region.

The surface structure and the elemental analysis are factors which affect the surface energy.

The arithmetic mean of the difference Ra is the measure most commonly used for surface roughness.

Titanium Grade V (Ti 6Al 4V ELI) is a very effective material for the manufacture of dental implants because it has a favorable combination of properties, such as low net weight, high compressive strength, elasticity, very high resistance to corrosion and excellent overall biocompatibility.

The excellent biocompatibility and therefore its perfect osseointegration is related to the material properties and the surface:
• a passive oxide very resistant film which protects the underlying metal from oxidation and corrosion.
• a very low dissolution rate of the oxide and an extremely low concentration of titanium charged layer.


Roughness


 The In vivo studies showed good osseointegration with a range of roughness of 1.5 to 2 μ.

 The procedure not only creates a rough surface roughness, but also changes the chemical composition of the surface.

 The strong upward trend in levels of roughness improves the mechanical anchoring and the enveloping surface.

The chemical and physical properties of surface such as the composition, ionic hydrophilic character and roughness are parameters that play a major role in the integration of the implant within the periodontal tissues.

 The geometry of the implant and the treatment of macro-porous area play an important role in the phase of primary fixation, it produces long-term high mechanical stability.

 The level of roughness of 10 μ micro - 1μ improves the interlocking of mineralized bone with the surface of the implant.

 And the surface roughness of the titanium micro-geometry are obtained by sanding the surface with alumina Al2O3, followed by etching using a combination of hydrochloric acid and sulfuric acid oxide.

The implants are sterilized by gamma radiation.